CK6136数控车床原始尺寸的误差汉中CK6136数控车床2012/07/19
CK6136数控车床刀具补偿是补偿实际加工时所使用的刀具与编程使用的理想刀具或对刀时的基准刀具之间的差值。在CK6136数控车床加工中合理运用刀具补偿会在很大程度上提高编程效率，同时也能提高也能提高工件的加工精度。CK6136数控车床加工中刀具补偿有刀具长度补偿和刀具半径补偿2中。掌握刀具的长度补偿和刀具半径补偿基本上能解决加工中因刀具改变或刀具磨损后而引起的轨迹变化问题万能回转头铣床冲床铣床炮塔铣床
CK6136数控车床刀具位置补偿80吨冲床http://xc9.etianhe.com/product_525_1.html
刀具的位置补偿包括刀具几何补偿和磨损补偿联系人孔女士电话：0632-5680515手机：18306370978,公司网址：
http://www.sdwlmc.com http://www.wannengxichuang.com
http://www.youyaji86.com
刀具几何补偿是补偿刀具形状和刀具安装位置与编程时理想刀具或基准刀具的偏移。在加工过程中若只用多把刀具进行加工，作为基准刀具的1号刀刀尖点的进给轨迹，其他刀具的刀尖点相对于基准刀刀尖的偏移量（即刀位偏差），刀具在加工过程中会出现磨损，刀具的磨损补偿是用于补偿刀具使用后刀具头部与原始尺寸的误差
这些补偿数据通常是通过对刀采集到的，而且必须将这些数据存储呆刀具的数据库中，加工时通过程序中的刀补代码进行提取执行立式铣床卧式铣床万能铣床万能铣床
CK6136数控车床刀具半径补偿钻铣床http://xc9.etianhe.com/product_530_1.html
采用尖角车刀对加工及编程都很方便，但由于刀具越尖就越容易磨损，并且刀具太尖而进给速度较大时，一般的轮廓车削将产生车螺纹效果，即使减小进给速度，也会影响到加工表面的粗糙度。为此，时常将车刀刀尖磨成圆弧过渡刃。
Tool position compensation25吨冲床http://xc9.etianhe.com/product_519_1.html
The position of the cutter compensation includes cutter compensation and wear compensation
Cutter compensation is compensation shape of tool and cutter installation position and programming ideal tool or reference tool offsets. In the process of using only to the cutting tool for processing, as a reference tool1tip point of the feed path, the other tool cutter point relative to the baseline tool tip offset ( i.e. knife position deviation ), in cutting process will wear, tool wear compensation is used to compensate for tool use the cutter head and the original size of the error
The compensation data are usually collected by the knife, but must use the data stored in the database for cutting tools, processing through the program of cutter compensation code fetch execute数控铣床摇臂钻床冲床压力机钻床摇臂钻床立式铣床
Cutter radius compensation
The sharp tool on machining and programming are very convenient, but because the cutting tool tip is more easy to wear, and the tool is pointed and the feed rate is high, the general contour turning will produce threading effect, even less feed rate, also will affect the machined surface roughness. To this end, often be grinding tool nose arc transition edge.
